PEAKMETER RCD Loop Resistance Tester MS5910

KSh53,000.00

Category: Electrical Tools

Description
Reviews (0)

RCD Loop Resistance Tester Multimeter With USB Interface for GFCI

Features of RCD Loop Resistance Tester

Trip-out current measurement
Trip-out time measurement
Contact voltage measurement
Loop resistance measurement
AC voltage measurement :0V —- 440V
Frequency measurement: DC 45Hz—-65Hz

Specifications	Range	Accuracy
Tripping-time	x1 IΔN300(slow 500ms)	±3ms
Tripping-time	x5 IΔN40ms(slow 150ms)	±3ms
Tripping Current	(0.2-1.1)IΔN	±0.1IΔN
Contact Voltage	0∽99.9V	±(10%+0.2V)
Alternating Voltage (UL-N, UL-L, UL-E)	0∽440V	±(3%+3V)
Frequency	DC, 45∽65Hz	±1Hz
Loop Resistance	0.1Ω∽199.9Ω	±(10%+0.2d)
	200∽1999Ω	±(10%+0.2d)
	2000∽9.99kΩ	±(10%+0.2d)
RL Current test	0.5 IΔN	±(10%+10d)
Multiplying Power of Measuring Current	x0.5, x1, x5
Current Level (IΔN)	10mA,30mA,100mA,300mA,500mA
Trigger Phase Angle	0° or 180°
Feature
Data Logging and Recall	1000Groups
Auto Power Off	√
Display Back Light	√
USB 2.0Interface	√
Low Battery Display	√
General
Power Supply	6×1.5V AA batteries
Size	194mm×150mm×72mm
Net weight	960g(batteries are not included)
Gross weight	2223g
Safety Rating	EN61010-1, CAT. Ⅲ 600V

Product Description of RCD Loop Resistance Tester

PM5910 is widely used in Electricity, Aarchitect, Electrical Installation area etc. It complys with IEC/EN 61010-1 1000V CAT II, 600V CAT III safety standards. Max common mode voltage: 600V AC RMS. High speed Microprocess ICs to make sure its reliability . stability and accuracy.It is the ideal tool for electrical inspection and repair. The RCD Tester brings the latest technology into an instrument which is compact, firm, durable, simple to use and convenient to carry. It can measure trip-out current, trip-out time, loop resistance, and online voltage, frequency measurement etc.

Multiplying power of measurement current : 0.5, 1, 5.
Standar/Selective type current measurement level :10 30 100 300 500mA
1000 groups of test results can be stored
Data stored in the host machine can be transmitted to a PC via a USB 2.0 interface
Comply with IEC/EN 61010-1 1000V CAT Ⅱ, 600V CAT Ⅲ Safety Standards
Maximum common mode voltage: 600V AC RMS
Display method: it is displayed on the LCD with maximum value at 6000
Measuring range selection: auto/manual measuring range
Frequency detection: auto